Optimum Gloss-Coat 10cc New Formula

Optimum Gloss-Coat 10cc New Formula

Two-Year Ceramic Coating – Very Easy Application

Optimum Gloss-Coat is a ceramic/polymer coating that forms a glossy, protective layer of clear coat over automotive finishes. This ceramic coating is extremely easy to use and lasts at least two years. A great product for a first-time ceramic coating user.

Optimum Gloss-Coat provides excellent resistance to scratching and marring, UV damage, chemical etching, and water and mineral staining. The coating has wonderful hydrophobic properties and provides unsurpassed gloss and slickness. Additionally, you can top Optimum Gloss-Coat with any non-abrasive wax or sealant of your choice to achieve additional gloss and depth.

Where Can I Use Optimum Gloss-Coat?

Optimum Gloss-Coat can be used to protect the following surfaces:

• Painted surfaces
• Wheels
• Plastic trim
• Bumpers
• Aluminum and chrome metallic trim
• Not recommended for glass.

Since Optimum Gloss-Coat bonds to surfaces it is applied to, any paint imperfections must be removed with polishing before application. Also all waxes and oils must be removed from the vehicle for the coating to get a proper bond on the paint.

Directions for Applying Optimum Gloss-Coat

1. For best results, prepare the paint before applying the coating. Wash and dry the vehicle, and use chemical and claybar decontamination to prepare the paint for polishing.
2. Polish the paint to remove any scratches or fine marring defects in the paint finish. If you like Optimum products, try polishing with Optimum Hyper Polish.
3. Clean the surface with 15% iso-propyl alcohol solution to remove all polishing oils, waxes, and silicones.
4. Prime the included foam applicator by dispensing an "X" pattern across the pad from the Optimum Gloss-Coat syringe.
5. Add a few drops of the coating on the leading edge of the pad. After this, only a few drops will be needed for each subsequent panel.
6. Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction.
7. Within 3-5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear.
8. Gently wipe the panel with a paint-safe microfiber towel to even out the coating and smooth out streaks. You will not need to press hard. This step is important because any spots that cure without being leveled will have to be polished.
9. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results.
10. Repeat steps 5-8 for each panel where application is desired.

One 10cc vial of Optimum Gloss-Coat will be enough to coat 2-3 cars. Foam applicator included.

Note: TCCA and FAA regulations prohibit this product from being shipped via DHL, UPS, Canada Post or FedEx express air freight services. This item can only be shipped with Canada Post, UPS, or FedEx ground freight options to destinations in Canada and the continental USA.